09-16-2016, 08:30 AM
I'm adding an expansion to my previous Dungeon Tiles set - this time some Sewer and Cavern Tiles (they'll cover Man-Made and Natural Opposites)
Started off making some Stalagmites scatter terrain for the Caverns.
Made simply with Tissue Paper and PVA Glue - Hot Glued down onto some broken bits of maths Equipment
![[Image: 20160915_084908-jpg.8760]](https://yaktribe.org/community/attachments/20160915_084908-jpg.8760/)
![[Image: 20160915_125419-jpg.8761]](https://yaktribe.org/community/attachments/20160915_125419-jpg.8761/)
Sit nicely into one of the previous dungeon tiles (this one...I "found it" under some books - I put it there to keep pressure on whilst drying and forgot it was there)
![[Image: 20160915_125429-jpg.8762]](https://yaktribe.org/community/attachments/20160915_125429-jpg.8762/)
Started to mark out the 3"x3" tiles for the caverns...but the sewers are a little different - they are made mainly with the offcuts and glues down onto thick card (same as my Chasm tile)
![[Image: 20160916_094544-jpg.8763]](https://yaktribe.org/community/attachments/20160916_094544-jpg.8763/)
The walkways are 1" in width and the goo down the middle is also 1" too - minis will still be able to stand on them no problems.
![[Image: 20160916_123627-jpg.8764]](https://yaktribe.org/community/attachments/20160916_123627-jpg.8764/)
![[Image: 20160916_123715-jpg.8765]](https://yaktribe.org/community/attachments/20160916_123715-jpg.8765/)
Using Hot Glue to add the texture for the Goo.
![[Image: 20160916_161436-jpg.8766]](https://yaktribe.org/community/attachments/20160916_161436-jpg.8766/)
C&Cs welcome and appreciated.
Started off making some Stalagmites scatter terrain for the Caverns.
Made simply with Tissue Paper and PVA Glue - Hot Glued down onto some broken bits of maths Equipment

Sit nicely into one of the previous dungeon tiles (this one...I "found it" under some books - I put it there to keep pressure on whilst drying and forgot it was there)
Started to mark out the 3"x3" tiles for the caverns...but the sewers are a little different - they are made mainly with the offcuts and glues down onto thick card (same as my Chasm tile)
The walkways are 1" in width and the goo down the middle is also 1" too - minis will still be able to stand on them no problems.
Using Hot Glue to add the texture for the Goo.
C&Cs welcome and appreciated.